NDS15P(ST3P)15PC 15PG Digital dial code type time relay

Main technical parameters

Model	NDS15P	NDS15PG	NDS15PC	NDS15PF	NDS15PA	NDS15PK	NDS15PY	NDS15PR
Working mode	Delay on	Release time delay	Power delay with transient contact	Delay off	Delay on	Signal disconnection delay	Star Triangle start delay	Reciprocating cycle delay
Delay range	0.1s~9.9s、0.1s~99.9s、1s~99s、1s~999s、10s~990s、0.1m~9.9m、1m~99m、0.1h~9.9h、1h~99h			0.1s~9.9s 1s~99s	0.1~9.9s、1s~99s、0.1m~9.9m、1m~99m、0.1h~9.9h、1h~99h共6种延时规格可调
Set way	2 /3 digit dial-code switch Settings				2 digit digital dial code switch setting, 1 bit base dial code switch setting
Repetitive error	When the delay range is greater than 1s, Er≤1% : when the delay range is less than 1s, Dr≤50ms
Contact number	Delay 2 conversion		Delay one conversion Transient 1 conversion	Delay 2 conversion	A. Delay 2 conversion B. Delay 1 conversion, transient 1 conversion	Delay one conversion	Delay star triangulation, transient 1 normally open	Delay one conversion
Contact capacity	AC250V 3A COSØ=1
Electrical life	1X105次
The rated voltage	AC24V、AC36V、AC110V、AC220V、AC380V 50Hz，DC24V; Allowable fluctuation range（85%~110%）Ue
The environment temperature	-5℃~40℃
At an altitude of	≤2000m
humidity	When the maximum temperature at the installation site is 40℃, the relative humidity of the air shall not exceed 50%, and higher humidity may be allowed at lower temperatures, such as 90℃ at 20℃.Special measures should be taken for occasional condensation due to temperature changes
installation	With different sockets and accessories, device type, panel type and 35mm guide rail installation can be realized

Working sequence diagram

nds15p st3p 15pc 15pg szbmssjjdq 4

The wiring diagram

Outline size drawing (mm)

nds15p st3p 15pc 15pg szbmssjjdq 5

Directions for use

1. Connect the product to the control circuit according to the wiring diagram on the label of relay housing and refer to the example of circuit Article 8.

2. Adjust the dial code switch, premake the delay time, turn on the power, and the relay starts to run according to the corresponding working sequence in the third article

3. NDS15PF power on time should be ≥ 2S.

4. When the NDS15PK signal control end (3 and 4) is closed, it shall be more than 50ms. From the time when the control end (3 and 4) is disconnected, the relay shall start to delay and delay to the preset time, and the relay shall release.

5. NDS15PA mode A and B can be selected by adjusting the shift switch on the panel, and the delay time and Mode A and B should be set before the product is powered on.

6. The delay time of NDS15PY star triangle conversion is 70ms.

NDS15P(ST3P)15PC 15PG Digital dial code type time relay

BCH-1 Differential relay

BCH-2 Differential relay

DCD-2A Differential relay

Return to work in the disease

The 32nd Shanghai International Electric Power Equipment and Technology Exhibition (EP Shanghai 2024)

What are the key points in selecting a time relay?

What is the future development trend of time relay?